Search on Google for FoCCCus 0.8.6. this tool can be used with a simple ELM327 Interface. Also you can buy extended License for Forscan or also use FoCOM. The FoCCCus Tool is free and you can easily code BCM and ICM with it. Simply search in CCC List for Cruise Control and Speed Limiter and activate both. Then Code BCM.
The heated screens should turn themselves on if it cold enough when you start up. mine comes on aswell mate normally about 39 oF i think. my heated screens come on aswell and mines a late 07. i'm also having problems with my headunit locking out and won't come back to life till i arm/disarm the alarm system. FOC Supporters. 8.5k. Name: Stephen. Ford Model: Ford Focus Mk2 LX Petrol 1.6. Ford Year: 2005. UK/Ireland Location: Co-Antrim. Posted January 30, 2022. On 1/29/2022 at 9:46 AM, ScottyC1979 said: The digital menu part of the dash clocks is flashing through mileage, outside temp, miles to next petrol stop, etc without stopping.Ford Focus fuel warning light - your fuel level is low, please top up before you run out of fuel and cause a 20 mile traffic jam. Doh! Ford Focus speed control - illuminates when switched on where applicable. Ford Focus indicator warning lights left and right. High beam warning light - lights up when the high beam is switched on.
The Focus Mk2 instrument cluster only has a shift-up light that is activated (red) just before the rev limiter kicks in (most people never rev the engine that high). However to be functional both the PCM hardware and PCM software needs to support this function. Unfortunately there are several PCM hardware/software versions that do not supportSee Ford Focus RS for sale on PistonHeads. That’s right: £23,000. You can spend a lot less, of course, or a bit more, but this is the going rate for an honest, late-plate Mk2 RS with Lux Pack 2
Posted January 15, 2018. The most likely cause is the failure of the door open switch. On the Mk2/2.5 these are integrated into the latch mechanism which means a huge hassle to replace/repair (I don't regard this as progress although it's probably done for cost reasons). It's also possible it's a wiring fault.
22 posts · Joined 2016. #4 · Mar 1, 2017. I found that you can enter the Diagnostic panel on the dash the same way as the Focus.For those that may not know - Hold down the 'OK' button on the left side of the steering wheel (when ignition off) then press 'Engine Start' button. You can then scroll through all the different diagnostic tests.v3rMU7f.