Follow the below steps to set up Assetto Corsa in VR and start playing: Go to Steam and navigate to your Assetto Corsa account. Scroll down to Properties. From the menu, select Launch options, and in the box, type VR. Relaunch the game and you shall see two options with one being VR.
Presenting the Definitive-er Drifting Guide for AC in 2021! With all the links & Instructions you'll need to get going from scratch, I hope you enjoy and fin To enable the LUT file you need to edit the ff_post_process.ini file in the Assetto Corsa directory you find in C:\Users\Documents\Assetto Corsa\cfg. You also need to copy the LUT file into that same directory. Your words on LUT is incorrect. The T300 RS is far from being linear. I've measured 4 different T300 wheels and one TX 458 base. Disable all spring and auto-centering effects, and fine tune the FFB strength using numpad + and - to your liking - each car is different so there's no real "golden rule". zethca. Pretty much default. 75% gain in TM panel, ~5 min force. If you're having trouble, you might have an input lag issue.

How to drift in Assetto Corsa with steering wheel in todays drift tutorial covering the fundamentals of drifting in a manual car with clutch. These tips and

SC is not needed with a wheel, unless you severly lack skill with a wheel as the SC option is more for controller players as its harder to stabilise a car with a controller IMO. You can't turn off factory SC, you can however turn off factory ABS or TC if the car allows it and obviously has those options. #7.
We setup the Drift and Grip setting for the Sim Racing Logitech G29 wheel in Assetto Corsa. The G920, G27 & G25 can also be used with these settings. These a
Max rotation, 100% ffb power, centering, spring, damper off in software. Generate LUT via wheelcheck and mess with cm settings. I'm sure you'll find many tutorials on yt, it's pretty much the same process for both thrustmaster t150/t300 and all logitech wheels. I prefer no LUT. This is a settings video for the Logitech G923 Steering Wheel and Force Feedback in Assetto Corsa using Content Manager and Logitech G Hub. 2021.Main Points:

As you may have guessed, having the proper wheel and FFB settings for racing on Assetto Corsa are critical to having an enjoyable and realistic experience with the game. After some tests and a bit of research, we’ve finally found a great starting point for Fanatec users that ticks all the boxes in terms of feel, force feedback, and immersion.

Comprehensive G2920/G29 Drifting Guide! Hey guys and gals! I see a lot of requests on this sub for guides/settings setups for the Logitech G920/G29 on AC, so combining that with personal requests for general tips for AC I got, I made this comprehensive guide, from downloading the drivers, to using the Content Manager, to setting up a session
To initiate a drift, come up to any corner of the map at a good speed, depending on the turn’s length and width. If it’s a long and wide turn, pull the handbrake and then go into the turn and start counter-steering as soon as you feel the wheels beginning to slip. If it’s a smaller turn, come out a little, then go towards the turn and

️My Socials: Discord •

In Content Manger, I have FFB set to 60 kerb, 50 road, 50 slip, 20 ABS. Enable enhanced understeer and enable hardware lock. I also have minimum force and filter set to 0%. Also set your degree of rotation to 900 in content manager. In documents/assetto corsa/cfg, there is a file called ff_post_process.ini, open it and change it so its like this.
sa8X.
  • v3pvedd2s6.pages.dev/186
  • v3pvedd2s6.pages.dev/67
  • v3pvedd2s6.pages.dev/443
  • v3pvedd2s6.pages.dev/197
  • v3pvedd2s6.pages.dev/599
  • v3pvedd2s6.pages.dev/70
  • v3pvedd2s6.pages.dev/375
  • v3pvedd2s6.pages.dev/289

    • best assetto corsa wheel settings for drifting